2-41
REAR SUSPENSION
Spring Pre-load Adjustment
The rear suspension spring pre-load
is adjustable to compensate for the
rider, load, riding style and road con-
ditions. The spring pre-load is adjust-
able to 7 positions. To change the
spring pre-load setting, place the
motorcycle on the side stand. Twist
the spring tension ring to the desired
position with the adjuster provided in
the tool kit. Position 1 provides the
softest spring tension and position 7
provides the stiffest. This motorcycle
is delivered from the factory with its
adjuster set on position 4 (GSX-
S1000/A), position 3 (GSX-S1000F/
FA).
Rear Suspension Label
NOTE: Ask your Suzuki dealer to dis-
pose of the rear suspension unit.
WARNING
This unit contains high-pressure
nitrogen gas.
Mishandling can cause explosion.
• Keep away from fire and heat.
• Read owner’s manual for more
information.
To Next Page
Loading...
