2-10
INSTRUMENT PANEL
The malfunction indicator light 9,
traction control system indicator light
G, coolant temperature indicator/oil
pressure indicator light I, ABS indi-
cator light J (GSX-S1000A/FA), and
LCD’s work as follows to confirm their
function when the ignition switch is
turned to the “ON” position.
• The malfunction indicator light 9
comes on for 3 seconds.
• All LCD segments appear and
then show the normal display.
When the ignition switch is turned on,
all the LCD segments are displayed.
At this time, if only km (km/h) is dis-
played on the LCD, switching to the
mile (mph) indication is not available
as the meter is of the km specifica-
tion.
TACHOMETER 2
The tachometer indicates the engine
speed in revolutions per minute (r/
min).
Press and hold the SEL button 1 and
turn on the ignition switch. Hold the
SEL button 1 for 4 seconds to switch
tachometer display pattern setting
mode.
To change the display pattern, push
the SEL button 1. The display pat-
tern changes in the order below.
Normal → Negative/Positive reverse
image → 1 segment → 2 segment →
Peak hold → Normal
Push the ADJ button 7 and returns to
the normal display.
OFF
TC
TC
1
2
3
H
E
km/h
mph
F
C
N
SEL ADJ
GEAR
km/L/100km
TRIP
1000r/min
RANGE
MPGUSIMP
AVG
A B
A
B
TRIP
2
3
km/h
GEAR
km/L/100km
RANGE
AVG
A
B
To Next Page
Loading...
