2-24
LEFT HANDLEBAR
CLUTCH LEVER 1
The clutch lever is used for disengag-
ing the drive to the rear wheel when
starting the engine or shifting trans-
mission gears. Squeezing the lever
disengages the clutch.
DIMMER SWITCH 2
“” position
The headlight low beam and taillight
turn on.
“” position
The headlight high beam and taillight
turn on. The high beam indicator light
also turns on.
Headlight flasher switch
Press the switch to flash the head-
light.
NOTICE
Sticking tape or placing objects in
front of the headlight can obstruct
headlight heat radiation. This can
result in headlight damage.
Do not stick tape on the headlight
or place objects in front of the
headlight.
NOTICE
Do not put objects in front of the
headlight or taillight when they are
on, and do not cover with clothes
when the motorcycle is stopped.
This may cause melting of the
lens or damage to the object by
the heat from the lens.
To Next Page
Loading...
