2-42
Damping Force Adjustment
The rebound damping force can be
adjusted by turning the adjuster 1.
The rebound damping force adjuster
1 is located at the bottom of the rear
suspension.
To adjust the damping force, set the
adjuster to the standard setting first
and then adjust the adjuster to the
desired position.
To set the rebound damping force
adjuster to the standard position, turn
the adjuster clockwise until it stops
and then turn it counterclockwise 1
turn.
Turn the adjuster clockwise from the
standard position to stiffen the damp-
ing force. Turn the adjuster counter-
clockwise to soften the damping
force. The damping force should be
adjusted gradually, 1/8 turn at a time,
to fine-tune the suspension.
To Next Page
Loading...
