6-54
4. Unhook the bulb holder spring 5
and pull out the bulb 6.
5. To replace the headlight bulb,
reverse the above sequence.
(GSX-S1000F/FA)
1. Remove the right and left meter
panels by referring to the METER
PANEL REMOVAL AND INSTAL-
LATION section.
Low beam
High beam
2. Turn the cap 1 counterclockwise
and remove it.
NOTICE
The headlight bulb’s life may be
shortened by oil from your fingers
if you touch it.
When replacing the headlight
bulb, be careful not to touch the
glass. Grasp the new bulb with a
clean cloth.
To Next Page
Loading...
