2-28
MODE SETTING
1. Press the traction control system
select switch 6 for mode selec-
tion.
2. Press the Mode switch (UP,
DOWN) 3 and change the indica-
tion on the traction control system
display in the meter cluster to the
desired mode. The display
changes as shown in figure.
3. Press the traction control system
select switch 6 to cancel the
mode selection. The traction con-
trol system display in the meter
cluster returns to the normal dis-
play mode.
OFF
TC
1
2
3
OFF
TC
1
2
3
OFF
TC
1
2
3
OFF
TC
1
2
3
OFF
TC
1
2
3
OFF
TC
1
2
3