How to troubleshoot ABS not working on Suzuki Motorcycle?
If the ABS on your Suzuki Motorcycle isn't working, begin by inspecting the ABS indicator light. If the light is not the issue, output the DTCs stored in the ABS control unit. Perform troubleshooting based on the DTCs output. Also, inspect the wiring and the ABS components.
General| Engine Type | 4-stroke, 4-cylinder, liquid-cooled, DOHC |
|---|---|
| Displacement | 1340 cc |
| Bore x Stroke | 81.0 mm x 65.0 mm |
| Compression Ratio | 12.5:1 |
| Power | 197 hp @ 9, 500 rpm |
| Torque | 155 Nm @ 7, 200 rpm |
| Transmission | 6-speed constant mesh |
| Seat Height | 805 mm |
| Fuel System | Fuel injection |
| Starter | Electric |
| Lubrication | Wet sump |
| Final Drive | Chain |
| Front Suspension | Inverted telescopic, coil spring, oil damped |
| Rear Suspension | Link type, coil spring, oil damped |
| Front Tires | 120/70ZR17M/C (58W), tubeless |
| Rear Tires | 190/50ZR17M/C (73W), tubeless |
| Curb Weight | 266 kg |
| Front Brakes | Twin disc |
| Rear Brakes | Disc |
| Overall Width | 735 mm |
| Overall Height | 1, 165 mm |
| Wheelbase | 1, 480 mm |
| Ground Clearance | 120 mm |
Warns inexperienced mechanics about risks and potential damage.
Safety precautions related to the ABS system.
Covers the internal mechanical components and systems of the engine.
Anti-lock Braking System components, diagnosis, and troubleshooting.
To Next Page