6-56
110 – 120 mm
(4.3 – 4.7 in)
1. Loosen the lock nut 1, and turn the
push rod 2 to locate the pedal 110 –
120 mm (4.3 – 4.7 in) above the top face
of the footrest.
2. Retighten the lock nut 1 to secure the
push rod 2 in the proper position.
NOTICE
An incorrectly adjusted brake pedal may
force brake pads to rub against the disk
at all times, causing damage to the pads
and disk.
Follow the steps in this section to adjust
the brake pedal properly.
To Next Page
Loading...
