EasyManua.ls Logo

Suzuki Intruder VL1500T - Inspection after Cleaning

Suzuki Intruder VL1500T
191 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8-9
SPECIAL CARE FOR MATTE FINISH
PAINT
Do not use polishing compounds or waxes
that contain polishing compounds on sur-
faces which have a matte finish. The use of
polishing compounds will change the
appearance of the matte finish.
Solid type waxes may be difficult to remove
from surfaces with a matte finish.
Friction while riding, excessive rubbing or
polishing of a surface with a matte finish will
change its appearance.
INSPECTION AFTER CLEANING
For extended life of your motorcycle, lubri-
cate it according to the GENERAL LUBRI-
CATION section.
Follow the procedures in the INSPECTION
BEFORE RIDING section to check your
motorcycle for any problems that may have
arisen during your last ride.
WARNING
Operating the motorcycle with wet
brakes can be hazardous. Wet brakes
may not provide as much stopping
power as dry brakes. This could lead to
an accident.
Test your brakes after washing the
motorcycle, while riding at slow speed. If
necessary, apply the brakes several
times to let friction dry out the linings.

Table of Contents

Related product manuals