6-67
Front axle tightening torque:
100 N·m (10.0 kgf-m, 72.5 lbf-ft)
Front axle holder bolt tightening torque:
33 N·m (3.3 kgf-m, 24.0 lbf-ft)
REAR WHEEL REMOVAL
WARNING
If the bolts and nuts are not properly
tightened, the wheel can come off, caus-
ing an accident.
Be sure to tighten the bolts and nuts to
the specified torque. If you do not have a
torque wrench or do not know how to
use one, ask your authorized Suzuki
dealer to check the bolts and nuts.
CAUTION
A hot muffler can burn you.
Wait until the muffler cools before
removing the axle nut.
NOTICE
Removing the rear wheel without use of
an accessory stand can result in your
motorcycle falling over and being dam-
aged.
Do not attempt roadside removal of the
rear wheel. Only remove the rear wheel
at a properly equipped servicing facility
using an accessory service stand.
To Next Page
Loading...
