6-63
SIDE STAND/IGNITION INTERLOCK
SYSTEM
Check the side stand/ignition interlock sys-
tem for proper operation as follows:
1. Sit on the motorcycle in the normal riding
position, with the side stand up.
2. Shift into first gear, hold the clutch in,
and start the engine.
3. While continuing to hold the clutch in,
move the side stand to the down posi-
tion.
If the engine stops running when the side
stand is moved to the down position then the
side stand/ignition interlock system is work-
ing properly. If the engine continues to run
with the side stand down and the transmis-
sion in gear, then the side stand/ignition
interlock system is not working properly.
Have your motorcycle inspected by an
authorized Suzuki dealer or a qualified ser-
vice mechanic.
To Next Page
Loading...
