Suzuki Intruder VL1500T - Page 38

2-20
DIMMER SWITCH 3
“” position
The headlight low beam and taillight turn on.
“” position
The headlight high beam and taillight turn
on. The high beam indicator light also turns
on.
NOTICE
Holding the dimmer switch between the
“
 ” and “  ” position will light both
the high and low headlight beam. This
improper operation can damage the
motorcycle’s headlight.
Use the dimmer switch to select only the
“
 ” or “  ” position.
NOTICE
Sticking tape or placing objects in front
of the headlight can obstruct headlight
heat radiation. This can result in head-
light damage.
Do not stick tape on the headlight or
place objects in front of the headlight.