Suzuki LT-Z400 - Front Suspension

2-14
FRONT SUSPENSION
Spring Pre-load Adjustment
This adjustment can be performed by
changing the adjuster ring position.
However, Suzuki recommends that
this adjustment be done by your
authorized Suzuki dealer, since a
special tool is needed for this job.
Damping Force Adjustment
The rebound and compression damp-
ing force can be individually adjusted
by turning the respective adjusters.
The rebound damping force adjuster
1 is located at the bottom of the front
suspension. The compression damp-
ing force adjuster 2 is located at the
top of the front suspension.
To adjust the damping force, set the
adjuster to the standard setting first
and then adjust the adjuster to the
desired position.
To set the rebound damping force
adjuster to the standard position, turn
the adjuster clockwise until it stops
and then turn it counterclockwise 1-1/2
turns.