2-15
To set the compression damping
force adjuster to the standard posi-
tion, turn the adjuster clockwise until it
stops and then turn it counterclock-
wise 1-3/4 turns.
Turn the adjuster clockwise from the
standard position to stiffen the damp-
ing force. Turn the adjuster counter-
clockwise to soften the damping
force. The damping force should be
adjusted gradually, 1/8 turn at a time,
to fine-tune the suspension.
REAR SUSPENSION
Spring Pre-load Adjustment
The adjustment can be performed by
changing the adjuster ring position.
However, Suzuki recommends that
this adjustment be done by your
authorized Suzuki dealer, since a
special tool is needed for this job.
To Next Page
Loading...
