5-13
Removing the Element
1. Remove the seat.
2. Unhook the hooks and take off the
air cleaner case cover 1.
3. Remove the screw 2, then
remove the element assembly 3.
4. Pull out the foam element from the
element frame.
CAUTION
Failure to inspect the air cleaner
element frequently if the vehicle is
used in dusty, wet, or muddy con-
ditions can damage your ATV.
The air cleaner element can
become clogged under these con-
ditions, and engine damage may
result.
Always check the air cleaner ele-
ment after riding in severe condi-
tions. Clean or replace the
element as necessary. If water
gets in the air cleaner case, imme-
diately clean the element and the
inside of the case.
To Next Page
Loading...
