7-44
3. Disconnect the socket 1 from
the headlight and remove the
rubber cap 2.
4. Unhook the bulb holder spring
3 and pull out the bulb 4.
5. To replace the headlight bulb,
reverse the above sequence.
Headlight Beam Adjustment
The headlight beam can be
adjusted both up and down or
right and left if necessary.
To adjust the beam up and down:
Loosen the adjuster 1. To adjust
the beam, move the headlight
assembly forward or backward.
To adjust the beam right and left:
Turn the adjuster 2 clockwise or
counterclockwise.
NOTICE
The headlight bulb’s life may
be shortened by oil from your
fingers if you touch it.
When replacing the headlight
bulb, be careful not to touch
the glass. Grasp the new bulb
with a clean cloth.
To Next Page
Loading...
