4-44
INSTRUMENT CLUSTER
69TB-01E
Malfunction indicator light
80J222
Your vehicle has a computer-controlled
emission control system. A malfunction
indicator light is provided on the instrument
cluster to indicate when it is necessary to
have the emission control system serviced.
When the engine switch is pressed to
change the ignition mode to ON, this light
comes on. When the engine is started, the
light goes out.
If the malfunction indicator light comes on
or blinks when the engine is running, there
is a damage in the emission control sys-
tem.
Bring the vehicle to an authorized SUZUKI
dealer or a qualified workshop to have the
damage fixed.
Also, if this light comes on when the
engine is running, there is a problem with
the continuously variable transmission sys-
tem or engine cooling system. Ask an
authorized SUZUKI dealer or a qualified
workshop to have the system inspected.
Electric power steering warning
light
80J408
When the engine switch is pressed to
change the ignition mode to ON, this light
comes on. When the engine is started, the
light goes out.
If this light comes on while driving, the
power steering system may not work prop-
erly. Have the system inspected by an
authorized SUZUKI dealer or a qualified
workshop.
NOTE:
• The following steering wheel operations
may gradually take more effort while
parking or driving at a very low speed.
This is not a malfunction of the steering
system, but the power steering control
system limits the power assist in order to
prevent it from overheating.
– The steering wheel is operated very
often.
– The steering wheel is kept in a fully
turned position for a long while.
NOTICE
Continuing to drive the vehicle when
the malfunction indicator light is on
or blinking can cause permanent
damage to the vehicle’s emission
control system, and can affect fuel
economy and driveability.
To Next Page
Loading...
Need help?
General
