5-115
OPERATING YOUR VEHICLE
69TB-01E
NOTE:
(For vehicle with speed limiter)
When the speed limiter is in standby condi-
tion:
69T050100
• When the speed limiter is in standby
condition (the speed limier indicator (d)
illuminates in white), press the driving
assist mode select switch (1) to switch
from speed limiter to adaptive cruise
control.
• When the speed limiter is activated (the
speed limiter indicator (d) illuminates in
green), the driving assist mode cannot
be switched from speed limiter to adap-
tive cruise control.
69T050570
2) Using the accelerator pedal, accelerate
or decelerate to the desired vehicle
speed (approximately 30 km/h (19
mph) or more), and press the driving
assist switch (2) to set the set vehicle
speed.
69T050590
The adaptive cruise control indicator
(c) will change from illuminated in white
to green. The set vehicle speed (b) will
be displayed on the information display
(a) in green. If the vehicle speed is set
while driving at below approximately 30
km/h (19 mph), the set vehicle speed
will be set to approximately 30 km/h
(19 mph).
(d)
(2)
(b) (c)
To Next Page
Loading...
