Svantek SV103 User Manual

Running the measurement
1) Connect one of the adapters to SV 107 sensor using the screw.
It is mandatory to use a screw for measurements.
Set up of SV 103
5) To start the measurement manually pres 2 arrows simultaneously.
SV 103 User Guide
6
4) Place the SV 107 on the palm of the hand as shown below. Secure the
cable on a wrist with a wrist band.
2) Put the mounting adapter on arm and place the SV 103 in it.

Svantek SV103 Specifications

General

Brand	Svantek
Model	SV103
Category	Measuring Instruments
Language	English