EasyManua.ls Logo

Sven BF-01 - Troubleshooting; Technical Specifications

Sven BF-01
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7. TECHNICAL SPECIFICATIONS
Parameter, measurement unit
Output power (RMS), W
Frequency range, Hz
S/N ratio, dB
Speaker diameters, mm
woofer
tweeter
Voltage supply, V/Hz
Dimensions (one speaker) (W × H × D), mm
Weight, kg
Value
14 (2 × 7)
40 – 18,000
75
Ø 89
Ø 25
~220/50
113 × 190 × 146
2.9
Notes:
Technical specications given in this table are supplemental information and cannot give
occasion to claims.
Technical specications and package contents are subject to change without notice due
to the improvement of SVEN production.
If none of the above methods can solve the problem, please seek professional advice at your nearest
service center
. Never attempt to repair the product yourself.
Problem
The MSS does not
turn on.
No sound.
The sound of
speakers is too
quiet.
Distortion of
sound.
Sound is produced
by one of the
channels only.
Cause
The MSS is not connected to the mains
outlet.
The power switch is o.
Volume level is set at minimum value.
The audio source is improperly connected.
Volume level is set at minimum value.
Large amplitude of the input signal.
The speakers are improperly connected to
the audio source.
Solution
Check the connection.
Turn on the switch.
Adjust volume control knob.
Connect the audio sources
correctly.
Adjust the volume control knob.
Turn down the source volume
and MSS volume.
Check the connection of speakers.
6. TROUBLESHOOTING
5
ENG
Operation Manual
BF-01

Related product manuals