The Conguraon Menu
Live View
These options allow you to configure Live View display settings.
General Tab
Option Description
Video Output
Interface
The default output is VGA/HDMI.
Live View Mode Select which multiview format to be the default in live view mode.
Dwell Time Set the number of seconds to dwell on a video channel before
switching to the next channel when enabling Start Auto-switch
via the Mouse Menu in Live View.
Enable Audio
Output
As the cameras supplied with the DVR do not support audio
capture, this option is not required.
Event Output The default output is VGA/HDMI.
Full Screen
Monitoring
Dwell Time
The number of seconds to show an alarm event screen.
View Tab
In Live View, you can change the display order of each camera connected -
1. Select an available viewing window on the right-hand side.
2. Double click one of the available cameras on the left-hand side that you would
like to place in the viewing window that you have selected.
Option Description
Play Start the live view of all cameras connected to the DVR.
Stop Stop the live view of all cameras connected to the DVR.
To Next Page
Loading...
