The Maintenance Menu
System Information
The System Information screen provides general details about the DVR. Click on the
individual tabs to find out the current status of your cameras, recordings, network
and hard drive. You may need some of the information shown here if you contact
Swann Technical Support for assistance.
Device Tab
On this tab, you can find out the DVR’s (default) name, model, serial number,
firmware version and encoding version.
Camera Tab
On this tab, you can check on the status of each camera connected to the DVR. You
can easily find out which DVR features such as motion detection, video tampering,
etc, are being utilized by the cameras.
The Maintenance Menu
11
To Next Page
Loading...
