Need help?Do you have a question about the Swann 4-4350 and is the answer not in the manual?
Describes compliance with FCC rules for Class B digital devices and potential interference.
Explains rules against eavesdropping and unauthorized recording of conversations.
Lists essential safety precautions for operating the DVR, such as ventilation and power adapter use.
Details default credentials and strongly recommends changing the password for privacy.
Describes the main menu options and how to access and navigate them.
Controls on-screen display elements like camera name, date, and time.
Fine-tunes camera image quality settings like brightness, contrast, and saturation.
Sets up motion detection parameters, including areas and sensitivity.
Obscures parts of the camera view for privacy, up to four masks per camera.
Detects if a camera's view is covered or tampered with, alerting the user.
Alerts the user when a camera signal is lost or not received.
Checks for image quality issues like blurriness, abnormal brightness, or color cast.
Configures line crossing detection for motion analysis, defining direction rules.
Sets up intrusion detection zones to monitor areas for specific motion events.
Notes PTZ compatibility, indicating functions are not supported on this DVR model.
Sets resolution, bitrate, frame rate, and quality for main stream recording.
Configures resolution and bitrate for substream video for remote viewing.
Defines when cameras record based on time and event type (Continuous, Motion, VCA).
Configures advanced recording options like overwriting oldest files to manage storage space.
Sets alternative recording schedules for specific holiday periods.
Allows manual override to start or stop recording for individual cameras.
Plays back video from selected cameras on a specific day, distinguishing normal and event recordings.
Searches and plays video based on specific events within a set time period.
Isolates and plays video based on user-applied tags for specific people or objects.
Defines specific areas within video to find and play relevant motion segments.
Saves normal video recordings to a USB flash drive after searching for specific criteria.
Saves motion or VCA event recordings to a USB flash drive.
Configures language, resolution, time zone, date format, and mouse pointer speed.
Configures Daylight Saving Time parameters, including start/end times and bias.
Sets device name, device number, auto-logout time, and menu output mode.
Configures network interface, IP addresses, subnet mask, gateway, and DNS servers.
Sets up remote access via DDNS (Dynamic DNS) using a SwannDNS account.
Configures PPPOE for direct internet connection via a DSL modem.
Synchronizes the DVR's clock with a network time server automatically.
Configures email account settings for sending event alerts and attached pictures.
Configures SNMP for network device management and monitoring.
Configures Network Address Translation (NAT) settings, including UPnP and port forwarding.
Configures advanced network options not covered in other network sections.
Configures live view display modes, audio output, and dwell times.
Adjusts camera display order and selection for live view mode.
Configures alerts for system events like HDD full, network disconnect, or illegal login.
Manages user accounts, levels, and permissions for DVR access.
Displays device information such as model, serial number, and firmware version.
Accesses and manages system event logs, allowing search, view, and export.
Imports or exports system configuration settings for backup and restoration.
Installs new firmware for the DVR via USB or FTP.
Resets system settings to factory defaults to resolve errors or issues.
Checks network traffic and obtains real-time information on network status.
Displays hard drive technical information and detects potential bad sectors.
Initializes and formats the hard drive or adds NAS storage for recording.
Configures hard drive quotas per camera and enables HDD sleeping function.
Runs manual diagnostic checks for camera image quality issues.
Provides definitions for technical terms used throughout the manual, covering various aspects of the DVR and networking.
To Next Page
General
