9
Record: Parameters - Substream
Camera: Select a camera that you would like to edit.
Stream Type: By default “Video” is selected. Select “Video & Audio” if
you have an audio source connected to your DVR’s audio input.
Resolution: The default streaming resolution is 352 x 240. You can se-
lect a higher resolution to increase the streaming quality (up to 704 x
240) or you can select a lower resolution (176 x 120 or 320 x 240) if you’re
having issues streaming live video from your DVR to your mobile device
or computer via SwannView Plus.
Frame Rate: The default frame rate for streaming is 30fps for NTSC and
25fps for PAL. You can change this to 15fps or 6fps to increase the video
quality but overall movement may be more choppy.
Video Quality: The amount of data your DVR will use to stream live vid-
eo. Lowering the quality reduces the amount of data required.
Please note: When streaming live video, the overall quality is de-
pendent on your internet connection and the encoding settings uti-
lised. This is especially important when streaming multiple cam-
eras at the same time. Lowering the resolution, frame rate and video
quality may help with this.
· Don’t forget to click “Ap-
ply” to save settings.
· Use the “Copy” function to
apply all settings to the other
cameras.
· Click the “Restore” button
to revert back to default set-
tings.
· Click the “Back” button to
go back to the Menu.
The Substream menu
gives you control on
how video is streamed
to your mobile device
or computer using the
SwannView Plus app
and Windows software.
You can change the
resolution and bitrate
if you’re having issues
streaming live video
from your DVR.
To Next Page
Loading...
