16
Camera: Video Loss
Camera: Select a camera that you would like to edit.
Enable Video Loss Alarm: Click the checkbox to enable.
Settings: Here you can define what will happen when the camera you’ve
selected has no incoming video signal.
Arming Schedule: Adjust your arming schedule by selecting a start day
and a time period (24-hour time). Click the “Copy” button to apply all
settings to the other cameras. Don’t forget to click “Apply” to save set-
tings. Click “OK” to exit.
Linkage Action: Options available are full screen monitoring, enabling
your DVR’s internal buzzer, send alerts to the SwannView Plus Windows
software (software must be running to receive alerts) and to send an
email. Don’t forget to click “Apply” to save settings. Click “OK” to exit.
· Don’t forget to click “Ap-
ply” to save settings.
· Use the “Copy” function to
apply all settings to the other
cameras.
· Click the “Back” button to
go back to the Menu.
If your DVR doesn’t
receive an active vid-
eo signal from one or
more cameras, this is
regarded as a potential
alarm event. When a
video input has no in-
coming signal, a “NO
VIDEO” message will
appear on-screen.
26-02-2016 Fri 09:30:15
Camera 01
To Next Page
Loading...
