11
Camera: Image
Camera: Select a camera that you would like to edit.
Time Segment 1 & 2: This function gives you the ability to assign a par-
ticular pre-set mode or customised settings for two time segments. For
example, one time segment for day time and the second time segment
for night time.
Mode: You can select from a number of different pre-set modes.
Brightness: This changes how light the image appears to be.
Contrast: This increases the difference between the blackest black and
the whitest white in the image. Don’t set the contrast too high as it will
degrade the image quality.
Saturation: This alters how much color is displayed in the image. The
higher the saturation, the more bright and vivid colors will appear.
Hue: This changes the color mix of the image.
Sharpness: Increase or decrease the overall sharpness of the image.
Increasing the sharpness will also increase the level of video noise that
is visible.
Denoising: Is a technique of reducing or removing image noise from a
video signal. This is especially useful for night time or low light environ-
ments.
Please note: Any changes made to the image settings available will
affect your recordings.
· Don’t forget to click “Ap-
ply” to save settings.
· Use the “Copy” function to
apply all settings to the other
cameras.
· Click the “Restore” button
to revert back to default set-
tings.
· Click the “Back” button to
go back to the Menu.
You can adjust the var-
ious settings available
to help fine-tune the
camera’s overall im-
age quality. At night,
images that you see
from the camera may
have increased noise.
By tweaking these set-
tings, you can elim-
inate noise and in-
crease image clarity.
26-02-2016 Fri 09:30:15
Camera 01
To Next Page
Loading...
