61
HDD: General
Add: Create a folder on your NAS device to save to. Select “NAS”, input
the IP address of your NAS device then click the “Search” button. If your
NAS device uses the iSCSI protocol select “IP SAN”. Select the folder
that you created then click “OK” to continue.
Init: Click the checkbox to select the hard drive then click this button to
format. A message will appear noting that all data will be erased.
Please note: From time to time, we recommend that you format the
hard drive. This ensures that your DVR runs efficiently and maintains
system integrity.
Connect a USB flash drive to copy events that you want to save. Re-
member, formatting the hard drive erases all your recordings.
*If a new hard drive has been installed inside your DVR, you need to for-
mat the drive before it can be used.
This function allows
you to initialize the
hard drive inside your
DVR. Initializing will
erase any data that is
on there. You also have
the option of adding a
NAS (network attached
storage) device that
your DVR can use to
record to.
To Next Page
Loading...
