8
Record: Parameters - Record
Camera: Select a camera that you would like to edit.
Camera Resolution: Displays the camera’s resolution.
Encoding Parameters: You can change settings for both Continuous and
Event recording (we recommend to have the same settings for both).
Stream Type: By default “Video” is selected. Select “Video & Audio” if
you have an audio source connected to your DVR’s audio input.
Resolution: The default recording resolution is 1280 x 720 (720P).
Frame Rate: The number of frames per second (fps) that your DVR will
record. The default is 15fps but can be changed to Full Frame when se-
lecting a lower recording resolution.
Video Quality: The amount of data your DVR will use to record video.
Lowering the quality reduces the file size of each video saved.
Pre-record: This reduces the chance of an event not being recorded. We
recommend changing this to 10 seconds (10s).
Post-record: Same as above but your DVR will continue recording after
an event has occurred. 30 seconds (30s) is the recommended length.
Expired Time (day): Determines how long the video footage will remain
on the hard drive without it being overwritten.
Record Audio: Click the checkbox to record audio when selecting “Video
& Audio” for the stream type.
Video Stream: This option allows you to choose which stream your DVR
will record. We recommend leaving this on Mainstream as it will record
at the highest resolution available.
The Parameters func-
tion allows you to
change the resolution
and bitrate for each
camera connected. By
default the recording
resolution is automat-
ically selected to fit in
with the capabilities of
the provided cameras.
· Don’t forget to click “Ap-
ply” to save settings.
· Use the “Copy” function to
apply all settings to the other
cameras.
· Click the “Restore” button
to revert back to default set-
tings.
· Click the “Back” button to
go back to the Menu.
To Next Page
Loading...
