Need help?Do you have a question about the Swann 960H and is the answer not in the manual?
General| Compression Format | H.264 |
|---|---|
| Network Connectivity | Ethernet |
| Power Supply | 12V DC |
| Video Output | HDMI, VGA |
| Recording Resolution | 960H (960x480) |
| Remote Access | Yes |
| Storage Capacity | Up to 2TB |
Congratulates the user, introduces the DVR, and explains what to expect in the manual.
Provides essential guidelines for safely installing the DVR, avoiding moisture, dust, and ensuring ventilation.
Identifies and describes the function of each button and indicator on the DVR's front panel.
Identifies and describes the function of each port on the DVR's rear panel for connections.
Illustrates how to connect cameras, power supply, and display/network devices to the DVR.
Details how to connect external devices like speakers, microphones, PTZ cameras, and external hard drives.
Explains how to operate the DVR using the USB mouse and remote control, including shutdown procedures.
Guides through the initial setup wizard for language, video format, time zone, and admin password.
Explains how to configure email alerts for events, recommending Gmail for setup.
Details NTP setup for automatic time synchronization and DST configuration for daylight saving time.
Guides on changing the default admin password for enhanced security and enabling password protection.
Explains how to download and configure the SwannView Link app for remote monitoring on mobile devices.
Details the installation of SwannView Link software for PC remote access and configuration.
Guides on how to log in to SwannView Link software using the DVR's UID, username, and password.
Describes the default display mode showing camera feeds and status icons.
Provides a visual overview of the DVR's menu structure and navigation options.
Introduces the chapter on DVR menu functions and recommends prior setup steps.
Explains how to adjust camera-specific display settings like name, record date, and image properties.
Details how to configure DVR output settings like resolution, display position, and mouse sensitivity.
Explains how to configure encoding parameters like resolution, frame rate, and bitrate for recording.
Covers recording options such as overwrite, pre-record, post-record, and pack duration.
Guides on setting up recording schedules for each channel based on different recording modes.
Explains how to search and play back recorded footage by channel, type, and time.
Details the controls and features of the playback interface, similar to a media player.
Describes how to mark and back up specific video incidents using the Cut and Copy functions.
Guides on connecting USB drives and selecting footage for backup.
Explains how to search for events triggered by motion or view the DVR's log of system events.
Covers general network settings like DHCP, static IP, and DNS configuration.
Introduces advanced network settings including DDNS, NTP, email, and IP filter.
Explains how to configure Dynamic DNS for remote access and how to deal with dynamic IP addresses.
Details Network Time Protocol setup for automatic time synchronization with time zones.
Guides on setting up email alerts for events, including server details and interval settings.
Describes the IP filter feature for controlling IP address access to the DVR.
Explains how motion detection works and how to enable/configure it per channel.
Details how to set the motion detection area, sensitivity, and time periods for optimal detection.
Provides tips for minimizing false triggers, positioning cameras, and adjusting settings.
Configures actions to take upon motion detection, like audio warnings, email alerts, or triggering other cameras.
Explains how to configure alerts and actions for video signal loss from a camera.
Details how the DVR reacts to exceptions like HDD full, HDD error, network disconnection, or IP conflict.
Shows information about the DVR's hard drive, including capacity and free space.
Displays Self-Monitoring, Analysis and Reporting Technology data for the hard drive's health.
Explains how to configure settings for PTZ (Pan, Tilt, Zoom) cameras connected to the DVR.
Details the controls for operating PTZ cameras within the DVR interface.
Covers general system settings like language, video standard, time zone, and password protection.
Explains how to define user accounts, levels of access, and permissions for the DVR.
Displays DVR model, firmware version, and other technical details for support.
Covers DVR maintenance tasks like auto reboot, firmware upgrades, and configuration backup/restore.
Provides an overview of the SwannView Link software interface for PC remote access.
Details how to configure local storage paths and AVI transcoding for SwannView Link.
Configures display, recording parameters like encoding, options, and schedule via SwannView Link.
Configures general and advanced network settings via SwannView Link.
Configures alarm settings like motion detection and video loss via SwannView Link.
Configures device and system settings like HDD and maintenance via SwannView Link.
Introduces the SwannView Link mobile app interface and basic controls.
Addresses common issues like image flickering, login problems, missing menus, and motion detection false triggers.
Discusses compatibility and configuration with third-party hardware like routers.
Provides warranty terms and conditions for the product in different regions.
Lists contact information for technical support via phone and email.
To Next Page
