The IP Filter can be used to modify
which IP addresses have permission to
talk to the DVR and which do not.
This is an advanced feature, and is
recommended for advanced users only.
Tinkering with things here - if you’re not
sure what you’re doing - is more likely to
break things than make anything better.
Network: Advanced: IP Filter
Network: Network Status
The Network Status screen
displays a quick summary of your
network settings. You can’t alter
things here - see the General
and Advanced tabs for places to
actually alter things.
Note that the values displayed in
the image to the left are examples
only. Your network settings may be
similar or very dierent!
To Next Page
Loading...
