Connect the DC12V
Output from the
power supply to
the power input.
Connect the SDI outputs from
your cameras into the marked SDI
inputs on the rear of the DVR.
Connect your cameras to
power, using the a power-
splitter (if included).
Connect the power
adapter(s) to a wall outlet.
If you’ve got a
monitor with
VGA but not
HDMI, connect
it to the VGA
output on the
DVR.
If you’ve got a TV or monitor with
HDMI in, connect to the HDMI port
on the DVR.
Connect an ethernet
cable from the LAN
port on the DVR to
a spare port on your
router.
Connection Diagram
To Next Page
Loading...
