The Audio Out
port can be used
to connect a
stereo, speakers,
headphones or
other external sound
device.
The Audio In ports can be
used to connect audio devices
to the DVR. Obviously, your
microphone probably won’t look
like that one - they’re often built
into cameras.
The PTZ port (RS485)
can be used to connect
compatible PTZ
devices, such as this
Swann PTZ SDI dome.
Connecting Additional Devices
Connect the mouse to the front USB 2.0 Port.
This port can also be used to connect USB devices to
backup to, but you’ll need to unplug the mouse to do it.
An external
hard drive with
an eSATA port can
be connected to the
eSATA port on the DVR,
and can be utilized in the
same manner as the internal
HDD.
The combination USB/eSATA1 Port is used
for backing up footage. You can connect:
- A USB Flash Drive
- A USB Hard Drive
- An eSATA Hard Drive
Note: If using USB storage media, USB 2.0 (or
faster) devices are recommended.
To Next Page
Loading...
