The Screen menu adjusts the display of
cameras in the main camera view.
The Audio menu sets the audio
recording and volume options.
Note: You must have a camera with
audio or a microphone to record or
monitor audio.
Border: Applies a border between the cameras in multi camera view.
Video Adjustment: Adjust the display to fit on your TV monitor.
Auto Switching: When active, in live view mode, the DVR will automatically
switch between camera channels in full screen mode. Set the delay from 1-10
seconds between changes or Off. To activate Auto Switching, press the button
marked when viewing your cameras. Press the button again to stop Auto
Switching.
Record: Set to on to record audio from the Audio Input on the back of the DVR.
Mute: Turns Audio on or off when viewing or recording cameras. Alternatively,
press the Mute button to turn Audio on or off while viewing your cameras.
Input Volume: Move the slider to change the volume of the audio recorded.
Output Volume: Move the slider to change the volume of audio playback.
Record Menu
Audio Menu
To Next Page
Loading...
