EasyManua.ls Logo

Swann DVR4-Alert SW242-DAL - System Time and Date Setting; Hard Disk Management

Swann DVR4-Alert SW242-DAL
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Manual
5.12 Miscellaneous Menu-Time Set
- 10 -
5.13 Hard Disk Set
TIME SET
2008/08/08 20:08:08
PRESS (UP,DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
HARD DISK SET
OVERWRITE ENABLED [YES]
MASTER HDD SIZ 120042MB
MASTER HDD USED 80865MB 77%
MASTER HDD FORMAT
SLAVE HDD SIZE N/A
SLAVE HDD USED N/A
SLAVE HDD FORMAT
PRESS (UP, DOWN), ENTER
(SELECT)
PRESS
(
MENU
)
TO EXIT
Configure syste
m
date and time:
[
Up] and [ Down]: move the cursor
[
SEL]: modify the value
[
Menu]: exit and save
If you choose “NO", the
recording process will stop when the
hard drive is full.
OVERWRITE ENABLED:
If you choose “YES”, recording
continues and overwrites oldest
recordings when the hard drive is full.
HDD SIZE:
Indicates the total capacity of the hard drive installed in the DVR.
HDD USED:
Indicates the actual space used on the hard drive and the percentage of hard
drive space used.
HDD FORMAT:
Choose this option to delete all data on a hard drive.
You will be prompted to input your password when formatting the HDD.
Note: When you install a new hard drive in the DVR, please use this function to
format the hard drive for use with the DVR.

Related product manuals