2.6 Accessories
Installation instructions for accessories are included in
the delivery of the each product.
2.6.1 Smart sensor package
Smart Sensor package is a combination sensor:
• Humidity sensor (SRH)
• Humidity and carbon dioxide sensor (SRHCO2)
• Humidity sensor and VOC sensor (SRHVOC).
The ventilation unit has a connection cable for the
sensor package. The sensor package is attached using
the supplied screw. On the R3 ventilation unit, the
installation position for the Sensor package is located
under the extract air filters in the extract air chamber.
The position of the sensor package in the ventilation
unit is shown in the image below. The extract air filter
must be dismantled from the ventilation unit while the
installation is performed.
All sensor combinations are encapsulated in the same
way. If there is a sensor package version installed in the
ventilation unit, you can replace it with an optional
sensor package. See the section Functions and use for
information about the sensor functions.
To Next Page
Loading...
Need help?
General