22
THREADING THE MACHINE
Thread Guide Disk
(Pass through the
middle of shaft)
Wrap the thread around thread guide disk clockwise. Make sure
the thread falls between the tension discs.
Thread Sensing Roller
One turn
Rotary Tension Disk
Wrap the thread around thread sensing roller one time.
Wrap the thread 1.5 times around the main tensioner in the V-
groove between the rotary tension disks. Pass the thread through
the spiral thread guide, the upper and lower thread guide, up
through the eye of the thread take-up lever, down though the lower
thread guide and then down through the lower thread guide.
Thread Guide
(Lower)
Thread
Hook Spring
Place the upper thread between the upper thread holder ball of the
thread guide (lower).
One and
half turn
To Next Page
Loading...
