42
GREASE SUPPLY
Inside of the arm, the take-up lever drive cam, the main part of the take-up lever, the needle bar reciprocator,
the presser foot drive shaft, the color change cam, and the blade cam (①, ②, ③, ④, ⑤, ⑥) should be
cleaned and greased once every three months.
CAUTION
The main power should be off while greasing the machine.
Use lithium grease made of high quality mineral oil.
Greasing the machine decreases noise and prevents wear.
①
②
③
⑤
⑥
④
To Next Page
Loading...
