12
3.13) FUNCTION THAT HAS AN AUTOMATIC SENSOR OF CUTTING THREAD
－ The machine detects when the upper thread breaks or the lower thread is out of the needle and automatically
stops the machine.
3.14) FRAME CENTER
3.15) AUTOMATIC RETURN TO STOP POINT IN UNEXPECTED BLACKOUT
－ When the power fails unexpectedly, the frame moves back to the exact point where the stitching stopped.
This helps reduce the number of defects.
3.16) USB INPUT/OUTPUT
－ It realizes an easy and simple way of input-output of DATA through the port for USB which is newly
applied. Input-output of DATA is possible while being connected with PC.
3.17) EDITING
－ You can delete, change, or insert stitch data and function codes (jump, finish, trimming).
3.18) MULTI-LINGUISTIC SUPPORT
3.19) THE SCREEN WILL INDICATE THE CAUSE OF ANY MACHINE STOPS.
3.20) THE SCREEN INDICATES RPM DATA.
3.21) FRAME MOVEMENT SPEED
－ You can adjust the frame speed to high, medium, or low.
3.22) THE SCREEN INDICATES THE MEMORY AVAILABLE FOR USE.
3.23) OTHER BRAND CODES
－ The machine can automatically read designs of various formats stored in the floppy disk.
[ Readable Format ]
1. SST 2. DST
To Next Page
Loading...
