1. Service
With this function, you can see certain values
of the boiler on the screen. The values are
updated once a second
2. Resetting the system
With this function the panel can be reset to
factory setting. After resetting, the panel is set
as follows: the boiler in Off mode, electrical
operation 1kw, LPG heating in On mode and
indoor temperature 22°C.Other functions are
disconnected.
3. Translator
This function is used to enable an external
main panel to operate the boiler. If a main
panel is connected to the Alde panel, it is
activated with the On button, otherwise it must
always be set at Off. Factory setting is Off.
4. OK
To leave the tool menu, press OK or Menu.
Service menus
Activated
Functions
Heater temp:
Sanitary temp:
Fan rotation:
Current:
Current:
Overheat:
Window switch:
Extern start:
RPM
A
deact/act
deact/act
deact/act
To Next Page
Loading...
Need help?
General
