28
CRUISE CONTROL / SPARE WHEEL
Cruise control
The driver of the vehicle should always remain
seated and in control of the vehicle when
cruise control has been engaged. Never leave
the driving seat for any reason when the
vehicle is underway.
Removal of spare wheel on ALKO
conversion:
! WARNING: Exercise care when lowering
the wheel and frame due to its weight.
Fig.1
Fig.2 Fig.3
Fig. 4
Removal
a. Spare wheel in the stowed position
(Fig. 1).
b. Remove the securing pins (a) from the
supports (b) at each side of the spare wheel
carrier frame (c) (Fig. 2).
c. Lift the wheel carrier frame (c) slightly and
move the frame supports (b) forward and
clear of the carrier frame (Fig. 3).
d. Lower the carrier frame and wheel to the
ground (Fig. 4).
e. Remove the spare wheel.
Replacement
Replacement is a reversal of the removal
procedure. Ensure the securing pins (a) are
correctly located in the frame supports (b).
a
b
c
To Next Page
Loading...
Need help?
General
