FITTED EQUIPMENT
155
Operation with batteries
(internal power supply)
Indicator Fault Remedy
(3) and (8)
flashing brightly
Flame not ignited Check gas supply (gas bottle, gas valve)
Press the (8) button after clearing the fault
(3) and (7)
flashing brightly
Burner defective
or cooling unit
defective
Check burner, burner nozzles, if necessary con-
tact Customer Service and arrange replacement
Acoustic signal at
15 second intervals
Undervoltage
detection (internal
batteries)
Replace batteries
Automatic switch-
ing from external
to internal power
supply does not
function (absence
of the onboard 12V
power supply for
the electronics)
Refrigerator does
not function, gas
operation not
possible although
the batteries are
inserted
Switch off the refrigerator and start again
The onboard power supply was interrupted during
the starting of the gas operation
Note: No automatic switching is performed during
the ignition.
To Next Page
Loading...
Need help?
General
