Maintenance
Your detector will alert you to potentially
hazardous CO concentrations in your home
when maintained properly. To maintain your
FireAngel detector in proper working order,
and to ensure that the sensor will last for the
lifetime of the product, it is recommended
that you:
• Test the sounder, power pack and circuitry
of your detector at least once per week by
pressing the Test/Reset button briefly (see
above).
• Perform the Sensor Test once every month
(See of the CO-9X user manual for more
details).
• Keep the detector free of dust by gently
vacuuming the case with a soft brush
attachment once per month.
To prevent the possibility of contaminating the
sensor in your detector and thus affecting its
reliability:
• Never use cleaning solutions on your
detector. Simply wipe with a slightly damp
cloth.
• Do not paint the detector.
• Do not spray aerosols on or near the
detector.
• Do not use any solvent based products near
the detector.
To Next Page
Loading...
Need help?
General
