EasyManua.ls Logo

Swift SW350B - User Manual

Swift SW350B
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Guide: SW350B

Questions and Answers

  • J
    jacob15Aug 16, 2025
    What to do if the light is too dim on my Swift SW350B Microscope?
    • R
      Rachel GreenAug 16, 2025
      If the light on your Swift Microscope is too dim, several factors could be responsible. First, check the iris aperture and open it wider if it's closed too far. Next, increase the intensity using the control wheel. Also, a dirty condenser lens can reduce light, so wipe it off with a soft cloth. Finally, ensure you're using the supplied power adapter, as low voltage can also cause dimness.
  • K
    Kelly LawsonAug 19, 2025
    Why won't my Swift SW350B image focus with a higher-powered objective?
    • J
      jonathan07Aug 19, 2025
      If the image won't come into focus when using a higher-powered objective on your Swift Microscope, the slide might be upside down. Flip the slide over so the cover slip is facing up.
  • E
    erica94Aug 22, 2025
    What to do if the lamp flickers on my Swift SW350B Microscope?
    • C
      Clarence AllenAug 22, 2025
      If the lamp flickers on your Swift Microscope, it could be because the bulb is not inserted into the socket correctly. Check to make sure the bulb is fully screwed into the socket. Also, ensure the power adapter is fully plugged in, both into the wall socket and into the microscope.
  • J
    Jacqueline GriffinAug 25, 2025
    Why is the image quality poor on my Swift SW350B Microscope?
    • C
      claudiahallAug 26, 2025
      Poor image quality on your Swift Microscope can stem from several factors. Ensure a glass cover slip is placed over the specimen. The slide's thickness can impact image quality, so use a lab-quality slide. Also, check that the slide is not upside down on the stage, and if you're using oil, clean the objective lens with a soft cloth and glass cleaner. Finally, adjust the iris aperture, as an aperture that is too narrow or wide can affect image quality.
  • C
    christina70Aug 28, 2025
    Why is the visual field uneven on my Swift SW350B?
    • M
      mosleyemilyAug 28, 2025
      An uneven visual field or a dark image at the edges on your Swift Microscope can occur for several reasons. Make sure the nosepiece is locked in place to center the objective lens by turning it until you hear a click. Ensure the slide is centered over the bulb using the X-Y translational control knobs so that the specimen is fully illuminated. A dirty objective or eyepiece lens can also cause this issue, so clean them with compressed air or a soft brush. Lastly, check the iris aperture and open it wider if it's closed too far.
  • A
    Anthony VillaAug 31, 2025
    Why does my Swift SW350B image move while adjusting focus?
    • S
      Scott StewartAug 31, 2025
      If the image moves while you're adjusting the focus on your Swift Microscope, it's likely that the slide is shifting on the stage. Reposition the slide more securely in the slide holder to prevent movement.
  • S
    Stacey AustinSep 3, 2025
    How to fix a blurry image on a Swift Microscope?
    • H
      hughessandraSep 3, 2025
      A blurry or dirty visual field on your Swift Microscope can be due to a few reasons. Start by cleaning the objective or eyepiece lens with compressed air or a soft brush. If the slide is dirty, clean it with glass cleaner. Also, make sure the eyepiece or objective lens is fully screwed into place; tighten them if they are loose.
  • A
    Aaron Webb IISep 6, 2025
    What to do if the objective lens collides with the slide on my Swift SW350B Microscope?
    • B
      brendabowersSep 6, 2025
      If the objective lens collides with the slide when switching to a higher power objective on your Swift Microscope, it could be due to a few reasons. Ensure you are using a lab-quality slide or flip the slide over so the cover slip is facing up if it's upside down or too thick. Also, lower the stage with the coarse focus knob if it is set too close to the objectives. If the issue persists, adjust the safety rack stop to stop the stage farther from the objectives.
  • K
    Kayla KimSep 9, 2025
    Why is the slide not moving on my Swift Microscope?
    • B
      Brittney MichaelSep 9, 2025
      If the slide is not moving when using the X-Y translational control knob on your Swift Microscope, it's likely that the slide has come unclipped from the holder. Reposition the slide in the holder and secure it with the clip.
  • E
    Eric LopezSep 12, 2025
    Why doesn't the lamp turn on in my Swift SW350B Microscope?
    • N
      nsmithSep 12, 2025
      If the lamp does not turn on in your Swift Microscope, first check that the adapter is fully connected or that batteries are installed, as the issue could be a lack of power source. If power is not the issue, the bulb may have burned out and needs to be replaced.

Summary

Microscope Specifications

Microscope Parts Identification

Microscope Assembly and Setup

Using the Microscope

Slide Placement and Specimen Centering

Clip slide onto holder, use X-Y controls to center specimen over light source.

Adjusting Eyepieces and Illumination

Adjust interpupillary distance for single image and set brightness.

Focusing Procedures

Use coarse and fine focus knobs, and diopter adjustment for clarity.

Magnification and Objective Changes

Rotate nosepiece to higher power, manage stage height to avoid collision.

Condenser and Diaphragm Adjustment

Adjust condenser height and diaphragm aperture for image resolution.

Immersion Oil Technique

Use immersion oil for 100X objective, clean lens after use.

Microscope Care and Maintenance

Troubleshooting Common Issues

Warranty and Customer Support

Swift SW350B Specifications

General IconGeneral
TypeBiological Microscope
Objective Lenses4x, 10x, 40x, 100x
IlluminationLED
Power SupplyAC adapter or 3 AA batteries
EyepieceWF10x, WF25x
StageDouble-layer mechanical stage
FocusCoaxial coarse and fine focus
CondenserNA1.25 Abbe condenser with iris diaphragm

Related product manuals