Swift SW350B User Manual

II. Parts of the microscope
III. Assembly and set up
Carefully remove the microscope from the box and set it on a sturdy, flat surface.
Remove the plastic covers from the eyepiece holders on the microscope's head, then
place eyepieces into the holders. Locate the power adapter and attach it to the
microscope, then plug it in. Turn the microscope on by pressing the power button on the
back of the base.
IV. Using the microscope
Turn the microscope on and use the illumination intensity control wheel to set the lamp
on the lowest brightness setting.
3

Swift SW350B Specifications

General

Brand	Swift
Model	SW350B
Category	Microscope
Language	English