Sandfiltersystem Basic 3
1.4 Transportation damage
We have packed your sand filtering device carefully and professionally before delivery.Please
remember to check that the package is undamaged and that the delivery is complete. External
transportation damage should swiftly be reported in writing to the haulier, and secondarily
to the shipper, in order for you, the consignee, to avoid a problematic situation.
1.5 Consequential loss
The guarantee does not cover any damage to the product that arises if the product is not used
according to the instructions in the accompanying manual.
2 Parts
The sand filtering system contains the following components: 3-way top valve with lid to filter tank, 1
manometer, 1 tightening ring in plastic to secure the lid, 1 filter tank, 1 filter pump, screws for
assembly, 1 manual
Observe: Always ensure that the water is turned off to both the suction and the
pressure hoses, to make sure that water cannot pour over the pump when
the filter's hose couplings are loosened. There is no guarantee against
damage from flooding of the pump.
2.1 Technical information - Sand filter BASIC 3
Sand filter unit (filter tank Ø400 mm) with pump mounted on the top, 3-way top valve, manometer,
plastic tightening ring as well as separate bottom strainer. The filter is ready for use with the
integrated UV unit for chemical free removal of floating algae in the water, electrical pool heater as
well as a separate particle filter unit for alternative use in garden ponds. UV light, pool heater and
particle filter unit are accessories and are not included.
Cable length including socket
temperature
Weight (without filter sand)
Swim & Fun Scandinavia – info@swim-fun.com – www.swim-fun.com 4
To Next Page
Loading...
