7
·OSD
⑴. Time code（SDI）
Under SDI input, it can display Time code. If no Time code information is detected, it will be
displayed as “TC: UNLOCKED”.
⑵. UMD
Set up the UMD under ‘UMD” submenu.
⑶. AFD (SDI)
User can set function keys F1～F5 or GPI pins as “AFD” to turn on or off this function. If no
relevant information is detected, it will be displayed as “AFD: UNLOCKED”.
⑷. Audio
Monitor the audio information. User can set function keys F1～F5 or GPI pins as “Audio” to turn
on or off this function.
The relevant parameters like position, audio channels and blending, etc can be changed under
“Audio” submenu.
To Next Page
Loading...
