SWIT S-1093F - Back Panel Connectors; Power, Indicator, and Audio; Battery Mount and Data Ports; Video Signal Interfaces

9
·Back Panel
⑴ TALLY Light: Red, Green and Yellow 3-color TALLY indicator.
⑵ DC 12V IN: Connect with DC12V 4-pin XLR power adapter, support 6.5V-24V voltage input (Pin 1:
Negative, Pin 4: Positive)
⑶ Battery mount connector
Connect with SWIT S-7004 series quick release battery plate, and then mount corresponding
V-mount or DV batteries. See details in “Optional Battery Plate”.
⑷ Audio Socket
AUDIO IN: 3.5mm analog audio input (CVBS)
AUDIO OUT: 3.5mm audio output, to monitor SDI embedded audio, HDMI and analog audio output
⑸ Multi-function Socket
GPI: TSL UMD&GPI control socket
USB Socket
⑹ Video Signal Interface
SDI-IN1: SDI input (BNC connector)
SDI-LOOP1: SDI loop through output from SDI-IN1 (BNC connector)
SDI-IN2: SDI input (BNC connector)
SDI-LOOP2: SDI loop through output from SDI-IN2 (BNC connector)
CVBS-IN: CVBS input (BNC connector)
CVBS-OUT: CVBS output (BNC connector)
HDMI-IN: HDMI input (HDMI-A connector)
HDMI-OUT: HDMI loop through output (HDMI-A connector)