Installation
12
If it doesn’t fit, check the axle flats
are aligned with the fork dropouts.
10mm or 9mm
3.
Fit the Swytch motor wheel onto your bike
3.1 Slot the Swytch motor wheel into
the dropouts of the forks.
Note
Most bikes have a 10mm dropout
slot width, so our standard motor
axle is 10mm wide. If the axle doesn’t
fit your bike, please get in touch at
support.swytchbike.com for support.
!
Don’t file your forks or axle to
make the motor wheel fit.
!
The motor cable should face the
ground when the bike is upright.
!
The motor cable should be on
the opposite side to the chain.
To Next Page
Loading...
