Sygonix PYO-813 - Commissioning and Operation; Visitor Rings at Outdoor Unit

36
e) Label name tag
• To label the name tag, the transparent plastic cover must be re-
moved. This is only clipped on.
Carefullyleverofftheplasticcoverwithaatscrewdriverbycare-
fully pushing the screwdriver into the slot between the cover and
the front plate.
• Label the name sign with a water-resistant pen; alternatively, you
can also make a dedicated sign (53 x 28 mm) with a laser printer.
• Put the name tag into the plastic cover and attach it again.