9
§OPERATION OF IGNITION SWITCH §
§DESCRIPTION OF ANTI THEFT INTELLIGENT LOCK(for Intelligent lock model )§
1.Set security：When motorcycle ignition lock is off
1.Sound and light warning : Press the remote control once, the horn will sound a warning tone, the
direction light will flash once. and the lock will be locked. After 3 seconds, it will enter the sound and light
warning state .
Silent alert: Press the mute key of the remote control once, the horn will sound, the direction light will
flash once the lock will be locked, and it will enter the silent alert state after 3 seconds.
2.Remove anti-theft and automatic recovery alert
Press the release key of the remote control, the horn will sound twice, the direction light will flash twice
the lock will be unlocked, and the alert will be released. (Normal unlocking) Remove anti-theft and
automatic recovery alert.
If the main switch is not turned on or the vehicle does not sense vibration within 20 seconds. the alarm
system will be regarded as false release and will automatically return to the original anti-theft alert state.
（silent alert or sound and light waning）(If you press the unlock key by mistake, it will be locked
automatically)
● careful ：Press the release key twice in 2 seconds to completely release the alarm, and it will not
automatically return to the alert state.
3. Alert not set
In the released state: stop and turn off the engine (turn off the main switch). If the anti-theft warning is
not set after 5 seconds. the direction light will flash three times. 30 seconds automatic locking and Enter
silent alert. (If you forget to lock the engine, you will give an alarm)
4. Automatic lock
When the main switch is off ：When the main switch is turned from off to lock, the lock will be locked
automatically after one second, and then it will enter the sound and light warning state after three
seconds. (The handle locks automatically)
In lock state ：Press the release key of the remote control once, and if it does not exit lock within 15
seconds, it will automatically return to the alert state.(If you press the unlock key by mistake, it will lock
automatically).
In lock state, Press the release key twice in 2 seconds. If it cannot be removed completely, it will
automatically return to the original anti-theft alert state (sound and light warning state or silent alert
state)
In the released state, When the main switch is turned from off to lock，and it will lock automatically after
15 seconds ,and enter the silent alert state, Press the release key twice in 2 seconds to completely
release the alarm, and it will not automatically return to the alert state.
1. Malicious operation of solenoid valve protection
In 10 seconds, if the solenoid valve is operated continuously for 10 times, it is judged as malicious
operation, and the system will automatically protect it.（In the protection state, press the remote control
IGNITION SWITCH
Smart key(remove the key
after pressing the switch)
To Next Page
Loading...
Need help?
General
